3D SEISMIC DATA, FRAC MAPPING & MORE – MICROSEISMIC CASE STUDIES
The following case studies provide additional information on 3D seismic data, fracture mapping, passive microseismic monitoring and other geophysical services offered by MicroSeismic.
-
Marcellus Microseismic
M. Duncan and Sherilyn Williams-Stroud
OilandGasInvestor.com | November 2009 -
Correlation of Surface Microseismic Event Distribution to Water Production and Faults Mapped on 3D Seismic Data: A West Texas Case Study
William R. Keller, B. J. Hulsey, and Peter Duncan
Expanded Abstracts | SEG | 2009 -
Surface Microseismic Monitoring of Slick-Water and Nitrogen Fracture Stimulations, Arkoma Basin, Oklahoma
Morris Hall and Jo Ellen Kilpatrick
Expanded Abstracts | SEG | 2009 -
Uncertainties in Passive Seismic Monitoring
Leo Eisner, Peter M. Duncan, Werner M. Heigl, and William R. Keller
The Leading Edge | Vol. 28 | p.648-655 | June 2009 -
Surface Based Microseismic Monitoring of a Hydraulic Fracture Well Stimulation in the Barnett Shale
James D. Lakings, Peter M. Duncan, Chris Neale, and Todd Theiner
Expanded Abstracts | SEG | 2006 -
Ft. Worth Basin, TX:
Completion required accurate frac mapping over entire wellbore length -
Delaware Basin, TX:
Ambiguity of proppant placement during stimulation -
Woodford, OK:
Application of Relative Location Technique from Surface Arrays to Microseismicity Induced by Shale Fracturing -
Midcontinent, US:
Using Microseismic Events to Constrain Fracture Network Models and Implications for Generating Fracture Flow Properties for Reservoir Simulation -
Piceance Basin, Colorado:
Hydraulic Fracture Diagnostics in the Williams Fork Formation Using Surface Microseismic Monitoring Technology -
Barnett Shale, TX:
Surface Based Microseismic Monitoring of a Hydraulic Fracture Well Stimulation
